Selection and installation of tires


Release time:

2024-11-21

If the rim is too wide or too narrow, it will change the design shape and bending point of the tire, which will definitely affect the service life of the tire. The section of the rim is too narrow, the center of the sidewall curvature moves down, and the toe part is easy to crack (usually called sub-mouth crack).

1. The choice of tire is mainly based on the following aspects to choose the tire specifications, patterns, speed level:

a. Vehicle type B. Application c. Self-weight d. Load e. Speed f. Installation position (driving wheel, guide wheel) g. Service conditions (driving route, climate environment,)

2, according to the vehicle performance, combined with the tire situation, reasonable tire assembly:

On the same shaft of the car, there must be eight similarities: ⑴, the same specifications, ⑵, the same structure, ⑶, the same material, ⑷, the same level, the same pattern, the same brand, the same air pressure, and the same load.

3. When installing tires, you must choose the standard rim of tire design:

If the rim is too wide or too narrow, it will change the design shape and bending point of the tire, which will definitely affect the service life of the tire. The section of the rim is too narrow, the center of the sidewall curvature moves down, and the toe part is easy to crack (usually called sub-mouth crack). However, if the cross section of the rim is too wide and the center of the bending disturbance moves up, the shoulder is easy to be empty or the steel wire of the shoulder carcass is broken (often referred to as zipper blasting).


All rights reserved©Shandong Baoli Science and Technology Co.,Ltd.  Powered by  www.300.cn  SEO

Business License

Consultation Now

* Please enter your phone number to get a free product quote

Submit